1.Using a Simon K's dedicated multi-copter program tgy-debug,and the mater chip with high stability crystal oscillator,making the motor control to more precise.
2.Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Before using new ESC,please check all connectors are correct,available(CANNOT
connect the battery at this moment).Then, please follow the ESC as below procedure:
1.Move the throttle stick to the bottom position and then turn on the transmitter.
2.Connect the battery pack to the ESC,the ESC begins the self-test process.
a special tone“123”is emitted,which means the voltage of the battery pack is in normal
range, and the N"beep" tones will be emitted,means the number of lithium battery
celis. Finally a long “beep_”tone will be emitted,which means the self-test is
OK,and waiting you to turn on the motor.If there is no response, please check the
battery whether in good condition, the batter connection is available.
When you use the brushless ESC，in order to allow ESC adapt the throttle range at
first time, please using the ESC or replace other motor control , should be re--set
the throttle to get in the most best throttle linearity.
if you use banana plugs connectors on main power wires （Input wires）. please connect the black wire (negative polarity)BEFORE red wire (positive polarity)
Max. current: 35A
Input Voltage: 2-4S /4-12 cell Ni-MH/Ni-Cd
BEC: 5V 2A(Linear mode)
length 145mm including power cable
4 x 30A RC Cars Brushless ESC
BQLZR 30A SimonK Brushless Speed Controller ESC (with BEC) For RC Quad Multicopter Pack Of 4 - B00SF5HH8U